Customization: | Available |
---|---|
Type: | Surgical Supplies Materials |
Material: | Pcl |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product name
|
Orthopedic Material Thermoplastic Leg Splint for ankle foot orthosis
|
Specification size
|
21cm*52cm 21cm*40cm 14cm*58cm
|
Thickness
|
3.2mm
|
Way of using
|
1. Prepare materials and tools: Prepare the low-temperature thermoplastic plate, scissors, hot water at 65-70°C, towel, etc. 2.
Select the appropriate plate: According to the part to be fixed and the condition, choose the appropriate low-temperature thermoplastic plate. 3. Cut the plate: Cut the low-temperature thermoplastic plate into the appropriate size and shape. 4. Heat the plate: Put the cut plate into the hot water at 65-70°C and heat it for 1-3 minutes until the plate is completely transparent and softened, and then take it out. Note that the water temperature should not be too high to avoid scalding the patient. If possible, a constant temperature water tank can also be used for heating. 5. Shape: Quickly place the softened plate on the part that needs to be fixed and shape it with hands or tools. Pay attention to keeping the temperature of the plate during the shaping process to avoid premature hardening. If you need to adjust the shape, you can put it back into the hot water to soften and then shape. 6. Fix: After the plate hardens and takes shape, Velcro, bandage, etc. can be used for fixation. 7. Check and adjust: Check the fixation effect to ensure that the plate is closely adhered to the skin and firmly fixed. If necessary, adjustments can be made. |